Stock Number: 231985
Make: Magnum
Model: MMG35
Year: 2013

Stock Number: 2-18-UEATT-77
Make: Misc

Stock Number: 206162
Make: Hyundai
Model: 110D-7E
Year: 2012

Stock Number: 2-18-UEF38
Make: Misc
Model: FORKS

Stock Number: 206847
Make: Liftking
Model: LK20P44
Year: 2013

Stock Number: 2-18-UEATT-56
Make: Misc
Model: MAST

Stock Number: ATT192
Make: CAT
Model: Skid Steer Forks
Year: 2011

Stock Number: EQU001403
Make: CAT
Model: E5000-AC
Year: 2008

Stock Number: EQC007988
Make: Taylor
Model: T450M
Year: 2007

Stock Number: 208401
Make: Mitsubishi
Model: FG50CN1
Year: 2015

Stock Number: 2-18-220431
Make: Misc

Stock Number: EQU005192
Make: Genie
Model: GTH1056
Year: 2011

Daewoo Propane Forklifts

Daewoo Propane Forklifts

Change a Propane Tank
Forklifts fueled by propane are common inside warehouse environments. These forklifts have a propane mount situated at the rear of the driver. These tanks have to be replaced periodically since they have limited lifespans. Drivers of forklifts must always use caution when handling propane tanks. Compressed gases are dangerous, especially since the gas is flammable. Always utilize care when removing and replacing propane tank to prevent injury.

1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn off the tank valve. The forklift should be left on until the engine dies. This process burns the gas off inside the transfer hose which connects the tank and the engine. Prior to taking the second steps, wear the proper safety equipment, like insulated gloves made of either leather or neoprene. It is essential for you to protect your skin from contact with the compressed gas, which is very cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When you put in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 Leaks can be inspected just by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to foam from around the valve. If this occurs, check the connection hose at the nut and the valve area. The connecting nut should be re-tightened if you detect any leaks around the valve area, and after that perform the leak checking process again. Persistent leaks mean that both the nut and connecting hose should be replaced. Then again, if replacing the nut and hose still does not stop the leak, the tank should be replaced.
4 Lastly, open the valve all the way to enable the gas to fill the connecting hose. After that you can start the lift truck and resume working.

  • Raymond Reach Forklifts
    The forklift company Raymond knows how to really make productive reach trucks. Their machines are specially manufactured with superior ... More
  • Doosan Used Forklifts
    The materials handling corporation Doosan is a major producer of equipment, with more than 100 forklift units made at many Doosan ... More
  • Kalmar Diesel Forklifts
    When it comes to both container handling and industrial operations, Kalmar is a true specialist. They completely know how to keep loads ... More
  • Nissan Counterbalance Forklifts
    The counterbalanced lift truck is a lift truck that utilizes a counter balance which is attached to the back end of the machine. This ... More
  • Hyundai End Control Forklifts
    End Control Forklifts AC stand-up end control forklift trucks are common in the material handling industry for their extreme ... More